Persistent Identifier
|
hdl:2014/48504 |
Publication Date
|
2018-07-09 |
Title
| In-Flight Verification and Validation of Colloid Microthruster Performance |
Author
| Ziemer, John (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Marrese-Reading, Colleen (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Cutler, Curt (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Dunn, Charles (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Romero-Wolf, Andrew (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Javidnia, Shahram (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Le, Thanh (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Li, Irena (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Barela, Phil (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Demmons, Nathaniel (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Hruby, Vlad (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Slutsky, Jacob (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Thorpe, James Ira (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Maghami, Peiman (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
Hsu, Oscar (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018)
O'Donnell, James (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018) |
Point of Contact
|
Use email button above to contact.
Ziemer, John |
Description
| Colloid Micronewton Thrusters (CMNTs) use an electrospray to provide precision spacecraft position and pointing control. They were demonstrated in space for the first time as part of NASA’s Space Technology 7 (ST7) payload hosted by the European Space Agency’s (ESA’s) LISA Pathfinder (LPF) technology demonstration mission in January, 2016. CMNTs were the actuator in the disturbance reduction system (DRS) that provided drag-free operation of the LPF spacecraft, which will be necessary for future gravity wave observatories such as ESA’s Laser Interferometer Space Antenna (LISA) mission, currently in Phase A and scheduled for launch in 2034. The CMNT technology met performance requirements operating at 5-30 µN of thrust with 0.1 µN resolution and ≤0.1 µN/ÖHz thrust noise to deliver the required nanometer-level precision spacecraft control measured by the gravitational reference sensor (GRS) in the ESA LISA Technology Package (LTP). The performance of seven of the eight CMNTs in flight was consistent with ground test results, and as a system, all eight thrusters met mission-level performance requirements. The colloid microthruster performance model of thrust and thrust noise as a function of operational parameters (i.e. beam current, voltage, temperature, etc.) was validated in flight over a wide range of conditions. A model and simulation of the thruster control algorithm was developed and validated with flight data to predict thrust noise. This capability is important for future missions because it relates directly to the acceleration noise on the test masses, which provide the gravity wave measurements. The CMNT thruster model data and validation with LISA Pathfinder/ST7-DRS flight experiments are presented in this paper. |
Subject
| Other |
Production Date
| 2018-07-09 |