Abstract:
While the capabilities of CubeSats have greatly increased in the past years, large, deployable high frequency apertures remain a limitation. The goal of this work was to develop a large 1 meter antenna operating at 35.75 Ghz for RADAR applications. A reflectarray design was selected, as the flat panels were compatible with the CubeSat form factor. A center-fed, Cassegrain configuration was selected for the feed, to minimize deployed height. The flat panel configuration and Cassegrain feed allowed the entire 1 meter antenna to be compatible with a 6U bus, leaving a little under 4U of volume for remaining instrument and spacecraft components. Several iterations of the design have been built and tested, with an RF test of a fully deployed assembly being completed most recently. The goal is to have the antenna flight ready before 2020.