Browsing JPL TRS 1992+ by Title

Q-PCR based bioburden assessment of drinking water throughout treatment and delivery to the International Space Station

Newcombe, David; Stuecker, Tara; La Duc, Myron; Venkateswaran, Kasthuri (Pasadena, CA : Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2005.', 2005-07-11)

Previous studies indicated evidence of opportunistic pathogens samples obtained during missions to the International Space Station (ISS). This study utilized TaqMan quantitative PCR to determine specific gene abundance in ...

QAWG - SmallSat discussion

Sheldon, D.J. (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018, 2018-03-15)

QCD spectrometer and arrays Progress Report

Echternach, P.M.; Bradford, C. M.; Reck, T.; Alonso, M.; Hayton, D. (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018, 2018-09-13)

QFD Application to a Software - Intensive System Development Project

Tran, T. L. (1996-08-20)

This paper describes the use of Quality Function Deployment (QFD), adapted to requirements engineering for a software-intensive system development project, and sysnthesizes the lessons learned from the application of QFD ...

A Quadrupole Ion Trap for the Detection of Biomarkers at Icy Worlds

Wiley, Josh; Belousov, Anton; Waller, Sarah; Nikolic, Dragan; Kidd, Richard; Madzunkov, Stojan; Cable, Morgan; Darrach, Murray (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018, 2018-10-16)

A quadtree algorithm to assess line of sight

Chamberlain, R. G.; Tailor, E. A.; Gutt, G. M.; Gonzalez, J. E. (2003-10-19)

Assessment of geometric line of sight is the most important purpose of the topography model in the Corps Battle Simulation, a constructive simulation program that supports training exercises for senior commanders and staff ...

QuakeSim and the Solid Earth Research Virtual Observatory

Donnellan, Andrea; Rundle, John; Fox, Geoffrey; McLeod, Dennis; Grant, Lisa; Tullis, Terry; Pierce, Marlon; Parker, Jay; Lyzenga, Greg (Pasadena, CA : Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2004, 2004-07-09)

We are developing simulation and analysis tools in order to develop a solid Earth science framework for understanding and studying active tectonic and earthquake processes. The goal of QuakeSim and its extension, the Solid ...

QuakeSim data architecture and technology

Donnellan, Andrea; Glasscoe, M.; Parker, J.; Granat, R.; Pierce, M.; Wang, J.; Rundle, J.; Sachs, M.; Ludwig, L. Grant (Pasadena, CA : Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2013, 2013-07-12)

The QuakeSim Project : numerical simulations for active tectonic processes.

Donnellan, Andrea; Parker, Jay; Lyzenga, Robert; Fox, Geoffrey; Pierce, Marlon; McLeod, Dennis; Grant, Lisa; Tullis, Terry (Pasadena, CA : Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2004., 2004-06-22)

In order to develop a solid earth science framework for understanding and studying of active tectonic and earthquake processes, this task develops simulation and analysis tools to study the physics of earthquakes using ...

Qualification and reliability for MEMS and IC packages

Ghaffarian, Reza (Pasadena, CA : Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2004., 2004-09-26)

This paper will review four standards that already released or being developed that specifically address the issues on qualification and reliability of assembled packages. Exposures to thermal cycles, monotonic bend test, ...

Qualification and reliability of photonic devices, system perspective

Alireza, Azizi (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2019, 2019-06-17)

Qualification and reliability testing of a microchip laser system for space applications

Wright, M. W.; Hemmati, H.; Franzen, D.; Sandor, M. (2003-07-06)

Qualification and reliability testing of a microchip laser system for space applications

Wright, Malcolm; Franzen, Don; Hemmat, Hamid; Sandor, Mike (Pasadena, CA : Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2003., 2003-07-07)

Qualification and reliability testing of a microchip laser system for space applications

Wright, M. W.; Hemmati, H.; Franzen, D.; Sandor, M. (2003-07-07)

This paper discusses the process being used and the results of the selection and qualification of a low cost prepackaged diode laser with a custom packaged microchip laser crystal.

Qualification and reliability testing of a microchip laser system for space applications

Wright, M. W.; Franzen, D.; Hemmati, H.; Sandor, M. (2003-07-07)

This paper discusses the process being used and the results of the selection and qualification of a low cost prepackaged diode laser with a custom packaged microchip laser crystal.

Qualification and selection of flight diode lasers for the NuSTAR Space Mission

Shapiro, Andrew; Meras, Patrick Jr.; Cooper, Mark; Dillon, R. Peter; Forouhar, Siamak; Gontijo, Ivair; Liebe, Carl Christian (Pasadena, CA : Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2011., 2011-03-05)

Qualification development of AlSi10Mg for robotic spaceflight

McEnerney, Bryan W.; Dillon, R. Peter; Borgonia, J.P.; Weinstock, D.; Shapiro-Scharlotta, Andrew A. (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2017, 2017-02-26)

Qualification methodology of AISi10Mg for spaceflight

McEnerney, Bryan W.; Dillon, R. Peter; Borgonia, J.P.; Shapiro-Scharlotta, Andrew A. (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2016, 2016-02-16)

Qualification of a multi-channel infrared laser absorption spectrometer for monitoring CO, HCl, HCN, HF, and CO2 aboard manned spacecraft

Briggs, Ryan M.; Frez, Clifford; Forouhar, Siamak; May, Randy D.; Meyer, Marit E.; Kulis, Michael J.; Berger, Gordon M. (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2015, 2015-07-12)

We report on calibration and testing of a five-channel laser absorption spectrometer designed to accurately monitor ambient gas-phase concentrations of these five compounds.

Qualification of Additively Manufactured Materials for Robotic Spaceflight

McEnerney, Bryan W.; Dillon, R. Peter; Borgonia, J.P.; Shapiro-Scharlotta, Andrew A. (Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration, 2018, 2018-10-01)

Browsing JPL TRS 1992+ by Title

Browsing JPL TRS 1992+ by Title

Search

Browse

All Content

This Collection

My Account